Wfp

Does anyone own or use the Tucker eco carbon fiber pole? Thinking about purchasing the special, get the 50’ pole for the price of the 40’. Thanks.

Unfortunately no…we do have a tucker carbon .

It’s a nice pole for the price. I have used one at trade show. It’s Tucker made and there economy pole. So that means they used a lower cost material to save money and give you a lower cost pole. Call me direct if you have anymore questions 8653100728

Thanks for the response!

1 Like

for sure man! Sorry for the delay. We have been so busy lately :stuck_out_tongue_winking_eye:

No problem, I know what you mean. Been a crazy busy summer for us here in Lexington, Kentucky too. I don’t know how you guys find the time to record for your YouTube channel. Lol. Take care.

1 Like

What size hose and how long do you perfer coming out of your ro/di to your pole? I’m currently using 200’ 3/8”. Thought about going to the standard 8mm xero hose. Will the smaller effect water pressure? Have 5/8” coming from faucet to ro/di cart. Have IPC eagle 4 stage system. Thanks.

I use only 80ft of Xero hose. I found much more and there have been homes with crap pressure that with that much hose it really starts to become a problem. With 80ft of xero hose and we carry usually 100 ft of garden hose in 50 ft sections its plenty for almost any job.

The 100’ of garden hose goes from the faucet bib to the cart I’m assuming. Do you wheel your cart to your location when you need more line? Just trying to simplify and keep good pressure too. So only hose going out to your pole is the xero then. Thanks for the info :smile:

Never mind, I seen one of your videos that showed the setup, I like. Simple, thanks again.

1 Like

Thanks ! Simple and we still maintain great pressure. Does take about 5-8 mins to setup but not that bad.

The Hydrocart produces more water than the Xero pure so hard to compare. Both come with 50 ft of 1/4 hose then you can connect up to 100 ft of Xero hose to that and have good water flow at the brush if the house has 4gpm flow

What do you think the max amount of hose you should use coming out of the IPC cart?

200 feet

200’ 1/4” hose or 200’ 8mm xero hose?
I’m using 200’ 3/8” that’s what IPC gave 8years a go for the cart.

200 ft of the 3/8 IPC hose

Thanks