I can’t get the rubber right in my Super Channel. I keep taking it out and putting it back in and have fixed it with a new rubber so many times it’s ridiculous. Today I was trying to straight pull with it and it was leaving water under the entire 9-inches on the left side of the 18-inch squeegee. It’s started leaving lines all the time, too. I don’t know how to get the rubber straight. I’ll post a video of me trying to use it yesterday when I get it uploaded and I’ll post a photo here just to show how it’s jacking up.
Can’t tell just from that pic but for starters, you’ve got a bit to much overhang on the end. If the end of the blade drags, it can affect at least a few inches in on a large squeegee.
@Luke, I was talking to a friend who gave up on the Super Channels because he had the same problem. Is pulling it too tight the only thing that causes this?
Yes my rubber in that photo is factory cut. I do cut some for shorter lengths. I have a quick segment about it in the first 5 mins of this video. Hopefully it helps.
And no dont stretch your rubber . Should be cut to the proper length.
