Like @drew0379 I was using an Ettore contour pro at 0 degrees but now that I have a Fliq I will be giving it a try as it will be quicker than transferring tools (like with the contour pro) or asking an employee to come inside to operate the mop on a seperate pole so you can get to it straight away.
Things to remember…
- Place down an old double bed sheet or large drop cloth to catch the water.
Don’t rely on towels being sufficient when cleaning a large area high up above. - Load plenty of water on to the mop but wring it out to remove excess.
- Pre mop the panels to remove excess dirt/heat to prevent streaking.
- If initial clean then just be quick on the first pass… as u will be doing it again anywayfor to fix the swishes/ drag marks etc!!!
- MOST IMPORTANTLY!
Chose your time of day. If possible do this first thing in the morning before there is any heat on the panels. It will be a lot easier and provide a better end result
But if you have the money invest in the Unger Stingray. I think it will definitely be a winner for reclean internal height work.